Difficulty
Easy
Steps
7
Time Required
15 - 20 minutes
Sections
2
- Back Panel
- 2 steps
- Fan
- 5 steps
Flags
3
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackAcer Spin 3 SP315-51-79NT
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Using the Phillips #1 screwdriver, remove twelve (12) screws from the back panel.
Using the Phillips #1 screwdriver, remove twelve (12) screws from the back panel.
1024
Step 2
- Gently pry the back plate off with your fingers.
Gently pry the back plate off with your fingers.
Step 3
Fan
- Using the Phillips #1 screwdriver, remove two screws securing the fan to the motherboard.
Using the Phillips #1 screwdriver, remove two screws securing the fan to the motherboard.
Step 4
- Using the same Phillips #1 screwdriver, unscrew four screws from the heatsink.
Using the same Phillips #1 screwdriver, unscrew four screws from the heatsink.
Step 5
- Remove the tape attached to the heat sink and the fan.
Remove the tape attached to the heat sink and the fan.
Step 6
- Unplug the fan from the motherboard.
Unplug the fan from the motherboard.
Step 7
- Gently remove the fan from the device.
Gently remove the fan from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 3 other contributors
Michael Duross
Member since: 10/26/2021
472 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 2-1, Sinclaire Fall 2021
Member of UMass Dartmouth, Team 2-1, Sinclaire Fall 2021
UMASSD-SINCLAIRE-F21S2G1
3 Members
6 Guides authored
