Difficulty
Moderate
Steps
4
Time Required
20 - 35 minutes
Sections
2
- Back Panel
- 2 steps
- Screen Assembly
- 2 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackAcer Spin 3 SP315-51-79NT
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Using the Phillips #1 screwdriver, remove twelve (12) screws from the back panel.
Using the Phillips #1 screwdriver, remove twelve (12) screws from the back panel.
1024
Step 2
- Gently pry the back plate off with your fingers.
Gently pry the back plate off with your fingers.
Step 3
Screen Assembly
- Using the Phillips #1 screwdriver, remove a total of four screws from the hinges (two on each hinge).
Using the Phillips #1 screwdriver, remove a total of four screws from the hinges (two on each hinge).
Step 4
- Remove wires connecting to motherboard.
- You can then simply pull the two halves of the computer away from each other.
Remove wires connecting to motherboard.
You can then simply pull the two halves of the computer away from each other.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Michael Duross
Member since: 10/26/2021
472 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 2-1, Sinclaire Fall 2021
Member of UMass Dartmouth, Team 2-1, Sinclaire Fall 2021
UMASSD-SINCLAIRE-F21S2G1
3 Members
6 Guides authored