Difficulty
Moderate
Steps
4
Time Required
15 minutes
Sections
1
- Cooling Fan
- 4 steps
Flags
0
BackAcer Spin 5 N17W2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Cooling Fan
- Use the Phillips #1 screwdriver to remove six 6 mm screws.
- Use the same screwdriver to remove six 5mm screws.
Use the Phillips #1 screwdriver to remove six 6 mm screws.
Use the same screwdriver to remove six 5mm screws.
1024
Step 2
- Use an opening tool to pry the back cover open.
Use an opening tool to pry the back cover open.
Step 3
- Remove two 5 mm screws by using the Phillips #1 screwdriver.
Remove two 5 mm screws by using the Phillips #1 screwdriver.
Step 4
- Use two opening tools to disconnect the cooling fan from the motherboard.
- Remove the fan from the device.
Use two opening tools to disconnect the cooling fan from the motherboard.
Remove the fan from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
YUJIE WANG
Member since: 10/04/2019
469 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
Duke University Pratt School of Engineering, Team S6-G1, Matos-Garner Fall 2019
Member of Duke University Pratt School of Engineering, Team S6-G1, Matos-Garner Fall 2019
DUKEPSE-MATOS-GARNER-F19S6G1
4 Members
7 Guides authored
