Difficulty

Difficult

Steps

10

Time Required

                          15 - 20 minutes

Sections

2

  • Cooling Fan
  • 4 steps
  • Motherboard
  • 6 steps

Flags

0

  • BackAcer Spin 5 N17W2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Cooling Fan
  • Use the Phillips #1 screwdriver to remove six 6 mm screws.
  • Use the same screwdriver to remove six 5mm screws.

Use the Phillips #1 screwdriver to remove six 6 mm screws.

Use the same screwdriver to remove six 5mm screws.

1024

Step 2

  • Use an opening tool to pry the back cover open.

Use an opening tool to pry the back cover open.

Step 3

  • Remove two 5 mm screws by using the Phillips #1 screwdriver.

Remove two 5 mm screws by using the Phillips #1 screwdriver.

Step 4

  • Use two opening tools to disconnect the cooling fan from the motherboard.
  • Remove the fan from the device.

Use two opening tools to disconnect the cooling fan from the motherboard.

Remove the fan from the device.

Step 5

              Motherboard
  • Remove four 5 mm screws using the Phillips #1 screwdriver.

Remove four 5 mm screws using the Phillips #1 screwdriver.

Step 6

  • Take off the black heat sink (be careful of the grey thermal grease).

Take off the black heat sink (be careful of the grey thermal grease).

Step 7

  • Remove all peripherals connecting to the motherboard.
  • Remove the second chip.
  • Remove the wireless LAN chip.

Remove all peripherals connecting to the motherboard.

Remove the second chip.

Remove the wireless LAN chip.

Step 8

  • Disconnect the three connection wires.

Disconnect the three connection wires.

Step 9

  • Take off the connecting port with black tape.
  • Take off the last port with purple tape.

Take off the connecting port with black tape.

Take off the last port with purple tape.

Step 10

  • Remove the motherboard from the device.

Remove the motherboard from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    He Kai

Member since: 10/04/2019

286 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Duke University Pratt School of Engineering, Team S6-G1, Matos-Garner Fall 2019                        

                                                  Member of Duke University Pratt School of Engineering, Team S6-G1, Matos-Garner Fall 2019 



                    DUKEPSE-MATOS-GARNER-F19S6G1                     


                                            4 Members                     


                                            7 Guides authored

john fredy mendoza torres - Nov 22, 2022

Reply

I need the motherboard where I can buy it..

I need the motherboard where I can buy it please…