Acer Spin 5 N17W2 Screen Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          20 - 25 minutes            

Sections

1

• Screen Assembly
• 8 steps

Flags

3

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackAcer Spin 5 N17W2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Screen Assembly               

• Use the Phillips #1 screwdriver to remove the six 6mm screws.
• Use Phillips #1 screwdriver to remove six 5mm screws.

Use the Phillips #1 screwdriver to remove the six 6mm screws.

Use Phillips #1 screwdriver to remove six 5mm screws.

1024

Step 2

• Use an opening tool to pry the back cover open.

Use an opening tool to pry the back cover open.

Step 3

• Use the Phillips #1 screwdriver to remove the three 5mm screws.
• Use the Phillips #1 screwdriver to remove the three 5mm screws on another side of hinge.

Use the Phillips #1 screwdriver to remove the three 5mm screws.

Use the Phillips #1 screwdriver to remove the three 5mm screws on another side of hinge.

Step 4

• Disconnect chips from the two end side of hinge.

Disconnect chips from the two end side of hinge.

Step 5

• Use the plastic opening tool to pry the hinge up.

Use the plastic opening tool to pry the hinge up.

Step 6

• Remove the wireless LAN chip from the motherboard.

Remove the wireless LAN chip from the motherboard.

Step 7

• Detach the sensors on each side of the hinge from the motherboard.

Detach the sensors on each side of the hinge from the motherboard.

Step 8

• Detach the screen assembly from the device.

Detach the screen assembly from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    YUJIE WANG                     

Member since: 10/04/2019

469 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Duke University Pratt School of Engineering, Team S6-G1, Matos-Garner Fall 2019                        

                                                  Member of Duke University Pratt School of Engineering, Team S6-G1, Matos-Garner Fall 2019 



                    DUKEPSE-MATOS-GARNER-F19S6G1                     


                                            4 Members                     


                                            7 Guides authored