Difficulty

Moderate

Steps

10

Time Required

                          6 - 10 minutes

Sections

2

  • Battery
  • 6 steps
  • Trackpad
  • 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAcer Spin 5 N17W2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Be sure to power off and unplug your device before you begin your repair.
  • Remove the twelve screws on the back cover using the Phillips #1 screwdriver.

Be sure to power off and unplug your device before you begin your repair.

Remove the twelve screws on the back cover using the Phillips #1 screwdriver.

1024

Step 2

  • Use an opening tool to pry the back cover open.

Use an opening tool to pry the back cover open.

Step 3

  • Remove two 4 mm screws at the two corners of the battery using the Phillips #1 screwdriver.

Remove two 4 mm screws at the two corners of the battery using the Phillips #1 screwdriver.

Step 4

  • Carefully remove the three tapes on the battery.

Carefully remove the three tapes on the battery.

Step 5

  • Carefully slide the battery connector out of its motherboard socket.

Carefully slide the battery connector out of its motherboard socket.

Step 6

  • Remove the battery from the device.

Remove the battery from the device.

Step 7

              Trackpad
  • Using the blue spudger, pry the two black clips from the two ribbon cables on the bottom of the mouse pad.

Using the blue spudger, pry the two black clips from the two ribbon cables on the bottom of the mouse pad.

Step 8

  • Remove ribbon cables connected to the middle of the mouse pad.
  • Remove the adhesive tape from the left side of the mouse pad.

Remove ribbon cables connected to the middle of the mouse pad.

Remove the adhesive tape from the left side of the mouse pad.

Step 9

  • Using the phillips #1 screwdriver, remove the 4 screws securing the mouse pad.

Using the phillips #1 screwdriver, remove the 4 screws securing the mouse pad.

Step 10

  • Using your thumbs, push the mouse pad from the inside of the computer towards ur self and slide the mousepad out of the computer.

Using your thumbs, push the mouse pad from the inside of the computer towards ur self and slide the mousepad out of the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    William

Member since: 02/20/2020

109 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       The Citadel Military College of South Carolina, Team S3-G18, Eggleston Spring 2020                        

                                                  Member of The Citadel Military College of South Carolina, Team S3-G18, Eggleston Spring 2020 



                    CMCSC-EGGLESTON-S20S3G18                     


                                            3 Members                     


                                            3 Guides authored