Acer Spin 5 Sp513 51 57Tp Cmos Battery Replacement Repair Guide

Difficulty

Very easy

Steps

6

Time Required

                          4 minutes            

Sections

2

• Battery
• 5 steps
• CMOS Battery
• 1 step

Flags

0

• BackAcer Spin 5 SP513-51-57TP

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Flip your laptop over so that the model sticker is facing upward towards the ceiling.
• Make sure your computer is turned off before starting to avoid getting shocked.

Flip your laptop over so that the model sticker is facing upward towards the ceiling.

Make sure your computer is turned off before starting to avoid getting shocked.

1024

Step 2

• Use a Phillips #1 screwdriver to remove the thirteen 6.5mm screws that secure the back cover.

Use a Phillips #1 screwdriver to remove the thirteen 6.5mm screws that secure the back cover.

Step 3

• Use a plastic opening tool to gently separate the back cover from the laptop. A snapping sound will be heard as a signal that the clips are being disengaged.
• Do not use any metal tools to pry open the device.
• It is recommended that you start from one corner and run the tool along the edges of your laptop from corner to corner for a safe removal.

Use a plastic opening tool to gently separate the back cover from the laptop. A snapping sound will be heard as a signal that the clips are being disengaged.

Do not use any metal tools to pry open the device.

It is recommended that you start from one corner and run the tool along the edges of your laptop from corner to corner for a safe removal.

Step 4

• Use a Phillips #1 screwdriver to remove two 4 mm screws that secure the battery.

Use a Phillips #1 screwdriver to remove two 4 mm screws that secure the battery.

Step 5

• Use your hand to carefully pull out the wiring harness from its port that is located between the battery and the motherboard.
• Remove the battery from the case.

Use your hand to carefully pull out the wiring harness from its port that is located between the battery and the motherboard.

Remove the battery from the case.

Step 6

              CMOS Battery               

• Grasp the CMOS battery with the tweezers and remove it from the motherboard.

Grasp the CMOS battery with the tweezers and remove it from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Anthony Vansell                     

Member since: 01/24/2020

872 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Hufflepuff                        

                                                  Member of Hufflepuff 



                    Meetup                     


                                            3 Members                     


                                            5 Guides authored