Acer Spin 5 Sp513 51 57Tp Solid State Drive Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Battery
5 steps
Solid State Drive
2 steps

Flags

BackAcer Spin 5 SP513-51-57TP
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Flip your laptop over so that the model sticker is facing upward towards the ceiling.
Make sure your computer is turned off before starting to avoid getting shocked.

Flip your laptop over so that the model sticker is facing upward towards the ceiling.

Make sure your computer is turned off before starting to avoid getting shocked.

1024

Step 2

Use a Phillips #1 screwdriver to remove the thirteen 6.5mm screws that secure the back cover.

Use a Phillips #1 screwdriver to remove the thirteen 6.5mm screws that secure the back cover.

Step 3

Use a plastic opening tool to gently separate the back cover from the laptop. A snapping sound will be heard as a signal that the clips are being disengaged.
Do not use any metal tools to pry open the device.
It is recommended that you start from one corner and run the tool along the edges of your laptop from corner to corner for a safe removal.

Use a plastic opening tool to gently separate the back cover from the laptop. A snapping sound will be heard as a signal that the clips are being disengaged.

Do not use any metal tools to pry open the device.

It is recommended that you start from one corner and run the tool along the edges of your laptop from corner to corner for a safe removal.

Step 4

Use a Phillips #1 screwdriver to remove two 4 mm screws that secure the battery.

Use a Phillips #1 screwdriver to remove two 4 mm screws that secure the battery.

Step 5

Use your hand to carefully pull out the wiring harness from its port that is located between the battery and the motherboard.
Remove the battery from the case.

Use your hand to carefully pull out the wiring harness from its port that is located between the battery and the motherboard.

Remove the battery from the case.

Step 6

              Solid State Drive

Using a Phillips #1 screwdriver, remove the one 4mm screw that secures the Solid State Drive.

Using a Phillips #1 screwdriver, remove the one 4mm screw that secures the Solid State Drive.

Step 7

Use your hand to pull out the Solid State Drive from the motherboard.
You will be pulling the solid state drive out to the left, as it will be connected to the port on the motherboard on its right side. This is opposite the direction that the pictures depict it.

Use your hand to pull out the Solid State Drive from the motherboard.

You will be pulling the solid state drive out to the left, as it will be connected to the port on the motherboard on its right side. This is opposite the direction that the pictures depict it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Anthony Vansell

Member since: 01/24/2020

872 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Hufflepuff                        

                                                  Member of Hufflepuff 



                    Meetup                     


                                            3 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team