Acer Spin 7 Sp714 51 Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Battery
4 steps

Flags

BackAcer Spin 7 SP714-51
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Before beginning, make sure you have all your tools and replacement battery on hand and that your laptop is set on a flat surface clear of other items. Once your workspace is set up and clean, you can begin.

What you need

Step 1

              Battery

Turn the laptop so that the back cover is visible and facing you. Make sure it is on a flat surface such as a table.
Use a Phillips #0 screwdriver to remove the 6 mm screws along the edge of the bottom cover.

Turn the laptop so that the back cover is visible and facing you. Make sure it is on a flat surface such as a table.

Use a Phillips #0 screwdriver to remove the 6 mm screws along the edge of the bottom cover.

1024

Step 2

Once all the screws are removed, you should easily be able to remove the back cover. This can be done by hand or by using a Spudger as seen in the tools list.

Once all the screws are removed, you should easily be able to remove the back cover. This can be done by hand or by using a Spudger as seen in the tools list.

Step 3

Remove the battery connector cable from the motherboard.
This will cut power to the laptop, reducing the likelihood of damage and injury.
Ensure that you are pulling the connector straight back, if you pull up at all you may damage the battery connector on the motherboard.

Remove the battery connector cable from the motherboard.

This will cut power to the laptop, reducing the likelihood of damage and injury.

Ensure that you are pulling the connector straight back, if you pull up at all you may damage the battery connector on the motherboard.

Step 4

Use a Phillips #0 screwdriver to remove the last two 3mm long fasteners at the edge of the laptop body, and carefully remove the battery.
Place the new battery in the battery slot
Do not bend or puncture the battery.

Use a Phillips #0 screwdriver to remove the last two 3mm long fasteners at the edge of the laptop body, and carefully remove the battery.

Place the new battery in the battery slot

Do not bend or puncture the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Zach Desrosiers

Member since: 03/22/2022

565 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team 7-3, Sinclaire Spring 2022                        

                                                  Member of UMass Dartmouth, Team 7-3, Sinclaire Spring 2022 



                    UMASSD-SINCLAIRE-S22S7G3                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team