Difficulty

Easy

Steps

3

Time Required

                          10 minutes            

Sections

1

  • Wi-Fi Card
  • 3 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackAcer Spin 7 SP714-51

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Make sure you disconnect the battery before working by removing the WiFi card for safety reasons and so the laptop has a less change of getting damage while working with it. This is seen in the guide on how to replace the battery found here.

What you need

Step 1

              Wi-Fi Card               
  • Turn the laptop so that the back cover is visible and facing you. Make sure it is on a flat surface, such as a table.
  • Using a standard PH0 Phillips-head screwdriver, work your way around the edge removing the 6mm screws along the way.
  • Once all the screws are removed, you should easily be able to remove the back cover. This can be done by hand or by using a Spudger as seen in the tools list.
  • Once the back cover is removed, make sure you disconnect the battery cable.

Turn the laptop so that the back cover is visible and facing you. Make sure it is on a flat surface, such as a table.

Using a standard PH0 Phillips-head screwdriver, work your way around the edge removing the 6mm screws along the way.

Once all the screws are removed, you should easily be able to remove the back cover. This can be done by hand or by using a Spudger as seen in the tools list.

Once the back cover is removed, make sure you disconnect the battery cable.

1024

Step 2

  • Disconnect the white and black antennae from the Wi-Fi card.
  • The Wi-Fi card is located on the left side of the laptop when it is flipped to see the bottom of the laptop.
  • The antennae should snap off upwards easily with a pry tool so the antennae and Wi-Fi card no longer connect.

Disconnect the white and black antennae from the Wi-Fi card.

The Wi-Fi card is located on the left side of the laptop when it is flipped to see the bottom of the laptop.

The antennae should snap off upwards easily with a pry tool so the antennae and Wi-Fi card no longer connect.

Step 3

  • Use a Phillips #0 screwdriver to remove the 6 mm retaining screw from the Wi-Fi card, and carefully pull the card free to remove it from the laptop.

Use a Phillips #0 screwdriver to remove the 6 mm retaining screw from the Wi-Fi card, and carefully pull the card free to remove it from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Zach Desrosiers                     

Member since: 03/22/2022

565 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       UMass Dartmouth, Team 7-3, Sinclaire Spring 2022                        

                                                  Member of UMass Dartmouth, Team 7-3, Sinclaire Spring 2022 



                    UMASSD-SINCLAIRE-S22S7G3                     


                                            4 Members                     


                                            5 Guides authored