Difficulty
Easy
Steps
7
Time Required
25 - 45 minutes
Sections
1
- Charging Port
- 7 steps
Flags
0
BackAcer Spin 5 N17W2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
This repair is needed because having a faulty charging port is a frequent issue for many consumers. The charging port can sometimes burn out if the fan stops working and the device gets too hot.
Before beginning this repair, turn off the device and unplug the laptop from the charger. It is also a wise to disconnect and/or remove the internal battery.
What you need
Step 1
Charging Port
- Power off your laptop before beginning disassembly and disconnect the device from the charger.
- Use a Phillips #0 screwdriver to remove twelve 6.0 mm screws from the back panel.
Power off your laptop before beginning disassembly and disconnect the device from the charger.
Use a Phillips #0 screwdriver to remove twelve 6.0 mm screws from the back panel.
1024
Step 2
- Use an opening tool in the seam of back case and slide it around the perimeter to release the clips securing it to the top case.
- Remove the back case to reveal the internals of the laptop.
Use an opening tool in the seam of back case and slide it around the perimeter to release the clips securing it to the top case.
Remove the back case to reveal the internals of the laptop.
Step 3
- Before replacing the charging port, unplug the internal battery from the motherboard.
- Unplug the broken charging port from the motherboard with tweezers.
Before replacing the charging port, unplug the internal battery from the motherboard.
Unplug the broken charging port from the motherboard with tweezers.
Step 4
- Use the tweezer to remove the broken charging port from the motherboard.
- Take your e-waste to an R2 or e-Stewards certified recycler.
Use the tweezer to remove the broken charging port from the motherboard.
Take your e-waste to an R2 or e-Stewards certified recycler.
Step 5
- Use tweezers to insert the new charging port securely.
Use tweezers to insert the new charging port securely.
Step 6
- Place the back case onto the laptop and press down around the edges of the perimeter.
- You should hear the clips snap together.
Place the back case onto the laptop and press down around the edges of the perimeter.
You should hear the clips snap together.
Step 7
- Use a Phillips #0 screwdriver to fasten the twelve 6.0 mm screws back into place.
Use a Phillips #0 screwdriver to fasten the twelve 6.0 mm screws back into place.
To reassemble your device, follow these instructions in reverse order. Apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%). Take your e-waste to an R2 or e-Stewards certified recycler.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Sara Al-Shumari
Member since: 01/10/2021
145 Reputation
1 Guide authored
Badges:
3
Team
York University, Team B-4, Allen Fall 2022
Member of York University, Team B-4, Allen Fall 2022
YORK-ALLEN-F22SBG4
3 Members
1 Guide authored
