Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
2
- Battery Pack
- 3 steps
- Base Door
- 3 steps
Flags
0
BackAcer TravelMate P653-V-6882
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Here is our guide on how to remove the base door for the Acer TravelMate P653-V-6882 safely!
What you need
Step 1
Battery Pack
- Turn the computer over so the base is facing up.
- Slide the battery lock to unlock position.
Turn the computer over so the base is facing up.
Slide the battery lock to unlock position.
1024
Step 2
- Slide the battery release latch to the right.
- The battery pack will pop out.
Slide the battery release latch to the right.
The battery pack will pop out.
Step 3
- Lift the battery up.
- Pull out the battery.
Lift the battery up.
Pull out the battery.
Step 4
Base Door
- Remove the five 7mm Phillips #1 screws.
Remove the five 7mm Phillips #1 screws.
Step 5
- Use the opening tool to separate base door from the bottom of the laptop.
- Be careful not to bend or crack the plastic back cover.
Use the opening tool to separate base door from the bottom of the laptop.
Be careful not to bend or crack the plastic back cover.
Step 6
- Gently pry open the base door by pushing up.
- Pull out the base door.
- Be careful not to bend or crack the plastic back cover.
Gently pry open the base door by pushing up.
Pull out the base door.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Daniel Popovic
Member since: 01/13/2020
985 Reputation
7 Guides authored
Badges:
10
+7 more badges
Team
York University, Team S1-G6, Woodhouse Winter 2020
Member of York University, Team S1-G6, Woodhouse Winter 2020
YORK-WOODHOUSE-W20S1G6
3 Members
9 Guides authored
