Difficulty

Easy

Steps

8

Time Required

                          10 minutes

Sections

3

  • Battery Pack
  • 3 steps
  • Base Door
  • 3 steps
  • RAM
  • 2 steps

Flags

0

  • BackAcer TravelMate P653-V-6882

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Ensure that the device is fully powered off before following the steps below.

What you need

Step 1

              Battery Pack
  • Turn the computer over so the base is facing up.
  • Slide the battery lock to unlock position.

Turn the computer over so the base is facing up.

Slide the battery lock to unlock position.

1024

Step 2

  • Slide the battery release latch to the right.
  • The battery pack will pop out.

Slide the battery release latch to the right.

The battery pack will pop out.

Step 3

  • Lift the battery up.
  • Pull out the battery.

Lift the battery up.

Pull out the battery.

Step 4

              Base Door
  • Remove the five 7mm Phillips #1 screws.

Remove the five 7mm Phillips #1 screws.

Step 5

  • Use the opening tool to separate base door from the bottom of the laptop.
  • Be careful not to bend or crack the plastic back cover.

Use the opening tool to separate base door from the bottom of the laptop.

Be careful not to bend or crack the plastic back cover.

Step 6

  • Gently pry open the base door by pushing up.
  • Pull out the base door.
  • Be careful not to bend or crack the plastic back cover.

Gently pry open the base door by pushing up.

Pull out the base door.

Step 7

              RAM
  • Locate the two RAM sticks on the bottom of the laptop.

Locate the two RAM sticks on the bottom of the laptop.

Step 8

  • Pinch the two metal pieces holding the RAM sticks in place outwards.
  • Holding the sides of the RAM, slide the RAM sticks out.
  • Be careful not to touch the gold connection pins on the RAM sticks, as this could damage the RAM

Pinch the two metal pieces holding the RAM sticks in place outwards.

Holding the sides of the RAM, slide the RAM sticks out.

Be careful not to touch the gold connection pins on the RAM sticks, as this could damage the RAM

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Basel Kandil

Member since: 01/18/2020

85 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team S1-G6, Woodhouse Winter 2020                        

                                                  Member of York University, Team S1-G6, Woodhouse Winter 2020 



                    YORK-WOODHOUSE-W20S1G6                     


                                            3 Members                     


                                            9 Guides authored