Difficulty

Moderate

Steps

16

Time Required

                          20 minutes

Sections

4

  • Battery
  • 4 steps
  • Hard Drive
  • 1 step
  • Motherboard
  • 5 steps
  • Touchpad
  • 6 steps

Flags

0

  • BackAcer TravelMate TMB115-M-C99B

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn off your laptop before starting.
  • Flip the laptop over so the model stickers face the ceiling.

Turn off your laptop before starting.

Flip the laptop over so the model stickers face the ceiling.

1024

Step 2

  • Remove the thirteen 6mm Phillips screws using the #0 screwdriver.
  • Remove the back of the laptop.

Remove the thirteen 6mm Phillips screws using the #0 screwdriver.

Remove the back of the laptop.

Step 3

  • Remove the two 7mm Phillips screws from the battery using the #0 screwdriver.

Remove the two 7mm Phillips screws from the battery using the #0 screwdriver.

Step 4

  • Unplug the battery from the motherboard.

Unplug the battery from the motherboard.

Step 5

              Hard Drive
  • Carefully disconnect the hard drive from the motherboard.

Carefully disconnect the hard drive from the motherboard.

Step 6

              Motherboard
  • Disconnect the two wires from the Wi-Fi interface.

Disconnect the two wires from the Wi-Fi interface.

Step 7

  • Remove one 6mm Phillips screw from the Wi-Fi interface using the #0 screwdriver.

Remove one 6mm Phillips screw from the Wi-Fi interface using the #0 screwdriver.

Step 8

  • Remove the Wi-Fi interface from the motherboard.

Remove the Wi-Fi interface from the motherboard.

Step 9

  • Remove the eight 7mm Phillips screws from the motherboard using the #0 screwdriver.

Remove the eight 7mm Phillips screws from the motherboard using the #0 screwdriver.

Step 10

  • Remove the motherboard.

Remove the motherboard.

Step 11

              Touchpad
  • Remove one 6mm Phillips screw from the middle of the touchpad with the #0 screwdriver.

Remove one 6mm Phillips screw from the middle of the touchpad with the #0 screwdriver.

Step 12

  • Remove the wire from the slot.

Remove the wire from the slot.

Step 13

  • Remove the stickers from the touchpad frame.

Remove the stickers from the touchpad frame.

Step 14

  • Remove one 6mm screw from the corner of the touchpad frame with the #0 screwdriver.

Remove one 6mm screw from the corner of the touchpad frame with the #0 screwdriver.

Step 15

  • Lift up the touchpad frame.

Lift up the touchpad frame.

Step 16

  • Remove the touchpad.

Remove the touchpad.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Tanvi Kharkar

Member since: 01/24/2019

334 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team S1-G5, White Winter 2019                        

                                                  Member of Cal Poly, Team S1-G5, White Winter 2019 



                    CPSU-WHITE-W19S1G5                     


                                            4 Members                     


                                            5 Guides authored