Adjusting Nishiki Aero Ii Seat Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Adjusting Nishiki Aero II Seat
3 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

BackNishiki Aero II
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Riding with your seat too low can make pedaling incredibly difficult, especially up any sort of hill. Thus, correctly adjusting your seat height is important.

What you need

Step 1

              Adjusting Nishiki Aero II Seat

Loosen the bolt that secures your seat.
To do so, use one wrench to hold the larger nut on the left side of the bike still while you loosen the nut on the right.

Loosen the bolt that secures your seat.

To do so, use one wrench to hold the larger nut on the left side of the bike still while you loosen the nut on the right.

1024

Step 2

Now that it can move, move the seat by wiggling it and pulling it in the direction you want to adjust it.
You want to the adjust the seat so that, when a pedal is at the far end of its rotation, your leg is fully extended.
Don’t worry about getting it perfect on the first try. Instead, guess your adjustment, tighten the bolt a little bit, try it out, and adjust again until you get it right.

Now that it can move, move the seat by wiggling it and pulling it in the direction you want to adjust it.

You want to the adjust the seat so that, when a pedal is at the far end of its rotation, your leg is fully extended.

Don’t worry about getting it perfect on the first try. Instead, guess your adjustment, tighten the bolt a little bit, try it out, and adjust again until you get it right.

Step 3

Once your seat is at the desired height, you just tighten the bolt the same way you loosened it.
Use two wrenches, one to hold it still and the other to tighten the nut.
Make sure it’s very tight, or else the seat might twist or lower over time.

Once your seat is at the desired height, you just tighten the bolt the same way you loosened it.

Use two wrenches, one to hold it still and the other to tighten the nut.

Make sure it’s very tight, or else the seat might twist or lower over time.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Tobias Elder

Member since: 04/25/2013

113 Reputation

                                      7 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team 21-53, Johann Spring 2013                        

                                                  Member of Cal Poly, Team 21-53, Johann Spring 2013 



                    CPSU-JOHANN-S13S21G53                     


                                            4 Members                     


                                            7 Guides authored

Needs Better Images#

Introduction#

What you need#

#

#

#

#

#

Team#

#

Needs Better Images

Introduction

What you need

Team