Difficulty

Easy

Steps

5

Time Required

                          15 minutes

Sections

1

  • fan temperature switch
  • 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackAEG Electrolux Competence B33512-4-M

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              fan temperature switch
  • All out the mains plug first as it is life-threatening to work on an open device which is still connected to the power.
  • Remove both screws that are used to hold the oven in place
  • Cautiously pull out the oven and place it on a small table. Be prepared for medium weight and use the handles in the middle of the oven on both sides.

All out the mains plug first as it is life-threatening to work on an open device which is still connected to the power.

Remove both screws that are used to hold the oven in place

Cautiously pull out the oven and place it on a small table. Be prepared for medium weight and use the handles in the middle of the oven on both sides.

1024

Step 2

  • Remove the two screws,
  • now slide the top metal sheet to the rear end of the oven
  • until you are able to lift the front edge of it and remove it entirely.

Remove the two screws,

now slide the top metal sheet to the rear end of the oven

until you are able to lift the front edge of it and remove it entirely.

Step 3

  • Cautiously pull out the ends of both white cables
  • Also pull out the light blue ones
  • This is the switch, hidden in cables

Cautiously pull out the ends of both white cables

Also pull out the light blue ones

This is the switch, hidden in cables

Step 4

  • Now put in the new switch and pay attention that it doesn’t touch any metal surfaces that may get hot

Now put in the new switch and pay attention that it doesn’t touch any metal surfaces that may get hot

Step 5

  • If the heating and the light don’t work after reassembling the oven, press a button or re-set the clock to its actual time. The heating should immediately start then.

If the heating and the light don’t work after reassembling the oven, press a button or re-set the clock to its actual time. The heating should immediately start then.

To reassemble your device, follow these instructions in reverse order

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             


        Bjarne is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Bjarne

Author

                                      with 1 other contributor 


                    Bjarne

Member since: 02/08/2015

356 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges