Difficulty

Moderate

Steps

4

Time Required

                          2 hours

Sections

1

  • Shock absorber
  • 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackAEG Öko Lavamat 1571 Turbo

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove upper lid
  • Unplug the power plug !!!
  • Loosen the water and sewage hose
  • Remove screws securing the top cover
  • Lift the lid at the back and slide it out to the rear

Unplug the power plug !!!

Loosen the water and sewage hose

Remove screws securing the top cover

Lift the lid at the back and slide it out to the rear

1024

Step 2

              Prepare removal of the rear housing part
  • Remove water hose
  • Disconnect the power plug
  • Remove plastic caps at the bottom right + left

Remove water hose

Disconnect the power plug

Remove plastic caps at the bottom right + left

Step 3

              Remove rear housing
  • Remove screws according to pictures (and only these !!!)
  • Remove rear housing part
  • Caution: The rear housing part is part of the load-bearing structure! The case is now slightly twisted.

Remove screws according to pictures (and only these !!!)

Remove rear housing part

Caution: The rear housing part is part of the load-bearing structure! The case is now slightly twisted.

Step 4

              Shock absorber replacement
  • The shock absorbers are situated to the right and to the left. The right one is extremely difficult to access.
  • To remove the pins, the lock must be pressed down at the front end.
  • The installation position is marked on the shock absorber.

The shock absorbers are situated to the right and to the left. The right one is extremely difficult to access.

To remove the pins, the lock must be pressed down at the front end.

The installation position is marked on the shock absorber.

Repeat the steps in reverse order to reassemble your device.

Cancel: I did not complete this guide.

        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Corey Meyer

Annika Faelker

VauWeh

Author

                                      with 2 other contributors 


                    Michael S.

Member since: 12/10/2017

463 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges