Difficulty

Easy

Steps

6

Time Required

                          10 minutes

Sections

1

  • Air Filter
  • 6 steps

Flags

0

  • BackAir Purifier

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Make sure you have the right air filter because filters are not universal and are specific to the appliance. The specific air filter can be found on the organization’s home page here.

Step 1

              Air Filter
  • If the access panel is locked, use the key to unlock it and open it by pressing the levers on both sides.
  • The appliance can open only if both levers are pressed simultaneously.
  • Use your hands to remove the old filter.

If the access panel is locked, use the key to unlock it and open it by pressing the levers on both sides.

The appliance can open only if both levers are pressed simultaneously.

Use your hands to remove the old filter.

1024

Step 2

  • When removing the old filter, do not throw away the filter cage. Wipe it down and prepare to use it for the new filter.
  • If you have not already wiped down your appliance, give it a thorough wipe-down with your preferred cleaning product.

When removing the old filter, do not throw away the filter cage. Wipe it down and prepare to use it for the new filter.

If you have not already wiped down your appliance, give it a thorough wipe-down with your preferred cleaning product.

Step 3

  • Remove the plastic from the new HEPA filter and place it into the filter cage.

Remove the plastic from the new HEPA filter and place it into the filter cage.

Step 4

  • Insert the carbon filter into the filter cage that you wiped down and make sure the corners are aligned with the filter cage.
  • Take your new HEPA filter and make sure the stickers are aligned and the corners of the pre-filter are fleshed down until it sticks to the carbon filter.

Insert the carbon filter into the filter cage that you wiped down and make sure the corners are aligned with the filter cage.

Take your new HEPA filter and make sure the stickers are aligned and the corners of the pre-filter are fleshed down until it sticks to the carbon filter.

Step 5

  • Insert your filter cage back into the access panel and make sure that the filter label is visible and facing upwards.
  • You can give your appliance one more wipe-down to ensure cleanliness.

Insert your filter cage back into the access panel and make sure that the filter label is visible and facing upwards.

You can give your appliance one more wipe-down to ensure cleanliness.

Step 6

  • Press the HEPA Setting for three seconds until the icon turns green.
  • The green icon indicates that the filter has been replaced and is ready to be used.
  • Close the access panel.

Press the HEPA Setting for three seconds until the icon turns green.

The green icon indicates that the filter has been replaced and is ready to be used.

Close the access panel.

Cancel: I did not complete this guide.

Attached Documents

  • AeraMaxPRO AMIII Manual
  • PDF - 1.11 mb
  • View

AeraMaxPRO AMIII Manual

PDF - 1.11 mb

Author

                                      with 1 other contributor 


                    Pita Vaouli

Member since: 08/22/2022

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       CSU Los Angeles, Team P-2, Briggs Fall 2022                        

                                                  Member of CSU Los Angeles, Team P-2, Briggs Fall 2022 



                    CSULA-BRIGGS-F22SPG2                     


                                            1 Member                     


                                            1 Guide authored