Difficulty

Difficult

Steps

6

Time Required

                          30 minutes

Sections

2

  • Back Cover
  • 1 step
  • Motherboard
  • 5 steps

Flags

0

  • BackAfterglow Wireless PS3 Controller

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.
  • Lift up and remove the controller back plate.

Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.

Lift up and remove the controller back plate.

1024

Step 2

              Motherboard
  • Desolder the battery connection from the motherboard.
  • Use this guide for more information on soldering.

Desolder the battery connection from the motherboard.

Use this guide for more information on soldering.

Step 3

  • Unscrew the two 9mm Phillips #0 screws that secure the motherboard to the controller front plate.

Unscrew the two 9mm Phillips #0 screws that secure the motherboard to the controller front plate.

Step 4

  • Detach the main motherboard fom the front pate by carefully pulling it off.
  • Be careful of the trigger buttons when pulling out the motherboard. The bottons have mini-motherboards secured in place on the front plate. Carefully pull these out.

Detach the main motherboard fom the front pate by carefully pulling it off.

Be careful of the trigger buttons when pulling out the motherboard. The bottons have mini-motherboards secured in place on the front plate. Carefully pull these out.

Step 5

  • Remove two button padding from the back of motherboard.

Remove two button padding from the back of motherboard.

Step 6

  • Desolder the four button connections from the motherboard.
  • Desolder the joy stick connections located on the front.
  • Use this guide for more information on soldering.

Desolder the four button connections from the motherboard.

Desolder the joy stick connections located on the front.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Natalie Cox

Member since: 02/17/2017

207 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team S19-G5, Hoffman Spring 2017                        

                                                  Member of USF Tampa, Team S19-G5, Hoffman Spring 2017 



                    USFT-HOFFMAN-S17S19G5                     


                                            4 Members                     


                                            14 Guides authored