Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

  • Display Screen
  • 10 steps

Flags

2

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAiptek Pocket DVII 1.3M LCD

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Display Screen
  • Remove the battery cover.
  • Remove the batteries.

Remove the battery cover.

Remove the batteries.

1024

Step 2

  • Remove the sticky black dots.
  • Remove the three black 4mm screws from the flip screen. Use a Phillips head screw driver.

Remove the sticky black dots.

Remove the three black 4mm screws from the flip screen. Use a Phillips head screw driver.

Step 3

  • Using an opening tool, separate the cover from the screen.
  • The cover won’t completely come off. This will happen in the next step.
  • Don’t be afraid to use a little more force.

Using an opening tool, separate the cover from the screen.

The cover won’t completely come off. This will happen in the next step.

Don’t be afraid to use a little more force.

Step 4

  • Using an opening tool remove the outside cover of the flip screen.
  • Move the cover towards the lens and then away from the screen.

Using an opening tool remove the outside cover of the flip screen.

Move the cover towards the lens and then away from the screen.

Step 5

  • With the cover off, push the brown locking mechanism up, so the picture cable can be remove.
  • You only need to unplug the bottom cable in the picture.

With the cover off, push the brown locking mechanism up, so the picture cable can be remove.

You only need to unplug the bottom cable in the picture.

Step 6

  • Remove the two black screws from the circuit board.

Remove the two black screws from the circuit board.

Step 7

  • With the opening tool, pop up the screen assembly.
  • The screen is glued to the black cover. Use more force if needed.

With the opening tool, pop up the screen assembly.

The screen is glued to the black cover. Use more force if needed.

Step 8

  • As in step 5, push up the brown locking mechanism of the remaining cable.
  • Unplug the picture cable.

As in step 5, push up the brown locking mechanism of the remaining cable.

Unplug the picture cable.

Step 9

  • Turn the circuit board over and with a soldering gun remove the two wires on each end.
  • Use a screwdriver to pull the loosened wire away.

Turn the circuit board over and with a soldering gun remove the two wires on each end.

Use a screwdriver to pull the loosened wire away.

Step 10

  • With the wires no longer holding the circuit board and screen together, remove and replace the broken screen.

With the wires no longer holding the circuit board and screen together, remove and replace the broken screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Gyozo Aba Hivatal

Member since: 01/21/2015

561 Reputation

                                      5 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       USF Tampa, Team 6-4, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 6-4, Brown Winter 2015 



                    USFT-BROWN-W15S6G4                     


                                            3 Members                     


                                            10 Guides authored