Difficulty

Easy

Steps

5

Time Required

                          5 - 10 minutes

Sections

1

  • Reload Slider Spring
  • 5 steps

Flags

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackAir Blasters Tek Six

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove screw of the grey slider
  • Using a screwdriver, remove the two 11.6 mm phillips 00 screws holding the grey slider together.
  • Remove grey slider from the main body of the blaster.

Using a screwdriver, remove the two 11.6 mm phillips 00 screws holding the grey slider together.

Remove grey slider from the main body of the blaster.

1024

Step 2

              Remove screws in main body
  • Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together.

Using a screwdriver, remove the six 9 mm phillips 00 screws holding the main body together.

Step 3

              Take the main body apart
  • Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed.

Using the plastic opening tools, carefully take apart the main case of the blaster to leave the inside exposed.

Step 4

              Remove metal pin
  • Carefully grab the metal pin keeping the air system and top spring, and slide it outwards. This will release the air system with the plunger completely.

Carefully grab the metal pin keeping the air system and top spring, and slide it outwards. This will release the air system with the plunger completely.

Step 5

              Remove screw holding the top spring to reload slider
  • Using a screwdriver, remove the 7.5 mm phillips 00 screw holding the top spring to the reload slider.

Using a screwdriver, remove the 7.5 mm phillips 00 screw holding the top spring to the reload slider.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Alfredo Antolinez

Member since: 09/22/2014

347 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 3-1, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 3-1, Brown Fall 2014 



                    USFT-BROWN-F14S3G1                     


                                            3 Members                     


                                            5 Guides authored