Difficulty

Moderate

Steps

6

Time Required

                          5 minutes

Sections

2

  • Front Panel
  • 5 steps
  • Controller Motherboard
  • 1 step

Flags

0

  • BackAir Hog Smash Bots

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Panel
  • Take out your controller and access to the back of the controller.

Take out your controller and access to the back of the controller.

1024

Step 2

  • Remove the screw on the battery lid. Using the Hex 4 socket and PH #0 bit, remove the 8 mm screw.

Remove the screw on the battery lid. Using the Hex 4 socket and PH #0 bit, remove the 8 mm screw.

Step 3

  • Remove the 2 AAA batteries.

Remove the 2 AAA batteries.

Step 4

  • Using the Hex 4 socket and PH #0 bit, remove the four 8 mm screws on the panel.

Using the Hex 4 socket and PH #0 bit, remove the four 8 mm screws on the panel.

Step 5

  • Use the plastic opening tool to disconnect the front and back parts of the panel.
  • Some of the internal components may be displaced when opening the controller.

Use the plastic opening tool to disconnect the front and back parts of the panel.

Some of the internal components may be displaced when opening the controller.

Step 6

              Controller Motherboard
  • Using the PH #0 bit, remove two 8 mm screws on the main board.
  • De-solder the LED wires from the motherboard.
  • Lift the motherboard with a spudger to remove it from the case.

Using the PH #0 bit, remove two 8 mm screws on the main board.

De-solder the LED wires from the motherboard.

Lift the motherboard with a spudger to remove it from the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Brittany Frecker

Member since: 02/08/2016

542 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       IUPUI, Team 1-1, Baechle Spring 2016                        

                                                  Member of IUPUI, Team 1-1, Baechle Spring 2016 



                    IUPUI-BAECHLE-S16S1G1                     


                                            4 Members                     


                                            7 Guides authored

Ali Hori - Sep 26, 2018

Reply

Hi,

Remot controller doesn’t work.

Because my son used it into water.

So what should I do for fix it?

Thanks.