Akaso Ek7000 4K Microphone Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 minutes

Sections

Battery
2 steps
Front Panel
2 steps
Microphone
3 steps

Flags

BackAkaso EK7000 4K
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Locate the battery cover at the bottom of the camera. Use your fingers to gently pry open the battery cover.

Locate the battery cover at the bottom of the camera. Use your fingers to gently pry open the battery cover.

1024

Step 2

Locate the small plastic flap attached to the battery. Pull the battery out towards you.

Locate the small plastic flap attached to the battery. Pull the battery out towards you.

Step 3

              Front Panel

Using the metal spudger, gently pry open the front panel from the exposed battery cartridge.

Using the metal spudger, gently pry open the front panel from the exposed battery cartridge.

Step 4

Remove the rest of front panel with your fingers or with assistance from the spudger.

Remove the rest of front panel with your fingers or with assistance from the spudger.

Step 5

              Microphone

After removing the front panel, make sure that the battery is also removed from the camera battery cartridge to continue.

After removing the front panel, make sure that the battery is also removed from the camera battery cartridge to continue.

Step 6

When observing the camera plate under the front panel, notice that there are four screws holding the camera plate in place.
Use a Phillips #000 screwdriver to remove all four screws.

When observing the camera plate under the front panel, notice that there are four screws holding the camera plate in place.

Use a Phillips #000 screwdriver to remove all four screws.

Step 7

Insert a thumb into the battery cartridge and gently push up. Be careful as not to pull apart or break any of the wiring that connects the front plate to the LED screen. The microphone will be on the left bottom corner of the front panel.
Gently pull out the microphone. Now you can re-adjust or replace the microphone.

Insert a thumb into the battery cartridge and gently push up. Be careful as not to pull apart or break any of the wiring that connects the front plate to the LED screen. The microphone will be on the left bottom corner of the front panel.

Gently pull out the microphone. Now you can re-adjust or replace the microphone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Katrina Shi

Member since: 02/06/2019

166 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UC Davis, Team S20-G2, Lore Winter 2019                        

                                                  Member of UC Davis, Team S20-G2, Lore Winter 2019 



                    UCD-LORE-W19S20G2                     


                                            3 Members                     


                                            4 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team