Difficulty
Moderate
Steps
7
Time Required
30 - 40 minutes
Sections
2
- Battery
- 6 steps
- Earpiece Speaker
- 1 step
Flags
0
BackAlcatel Fierce 4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Using a plastic opening tool, pry the back cover off of the phone.
Using a plastic opening tool, pry the back cover off of the phone.
1024
Step 2
- Remove the seventeen Phillips #000 screws from the mid-frame.
Remove the seventeen Phillips #000 screws from the mid-frame.
Step 3
- Pry off the mid-frame using a plastic opening tool, working your way around the perimeter.
Pry off the mid-frame using a plastic opening tool, working your way around the perimeter.
Step 4
- Use a plastic opening tool to disconnect all of the cables on the motherboard.
- Use a spudger to flip up the retaining flap on the ribbon cable ZIF sockets.
Use a plastic opening tool to disconnect all of the cables on the motherboard.
Use a spudger to flip up the retaining flap on the ribbon cable ZIF sockets.
Step 5
- Remove the motherboard from the phone.
Remove the motherboard from the phone.
Step 6
- Carefully pry up the battery with a plastic opening tool, or your hands.
Carefully pry up the battery with a plastic opening tool, or your hands.
Step 7
Earpiece Speaker
- Use tweezers to pull the earpiece speaker out of the phone.
Use tweezers to pull the earpiece speaker out of the phone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Rawan
Member since: 02/22/2018
644 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team S1-G2, Cagle Spring 2018
Member of USF Tampa, Team S1-G2, Cagle Spring 2018
USFT-CAGLE-S18S1G2
4 Members
10 Guides authored