Difficulty
Easy
Steps
7
Time Required
15 minutes
Sections
2
- Battery
- 6 steps
- Loud Speaker
- 1 step
Flags
0
BackAlcatel Fierce 4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Using a plastic opening tool, pry the back cover off of the phone.
Using a plastic opening tool, pry the back cover off of the phone.
1024
Step 2
- Remove the seventeen Phillips #000 screws from the mid-frame.
Remove the seventeen Phillips #000 screws from the mid-frame.
Step 3
- Pry off the mid-frame using a plastic opening tool, working your way around the perimeter.
Pry off the mid-frame using a plastic opening tool, working your way around the perimeter.
Step 4
- Use a plastic opening tool to disconnect all of the cables on the motherboard.
- Use a spudger to flip up the retaining flap on the ribbon cable ZIF sockets.
Use a plastic opening tool to disconnect all of the cables on the motherboard.
Use a spudger to flip up the retaining flap on the ribbon cable ZIF sockets.
Step 5
- Remove the motherboard from the phone.
Remove the motherboard from the phone.
Step 6
- Carefully pry up the battery with a plastic opening tool, or your hands.
Carefully pry up the battery with a plastic opening tool, or your hands.
Step 7
Loud Speaker
- Use a plastic opening tool to pry up the speaker.
Use a plastic opening tool to pry up the speaker.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Rawan
Member since: 02/22/2018
644 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team S1-G2, Cagle Spring 2018
Member of USF Tampa, Team S1-G2, Cagle Spring 2018
USFT-CAGLE-S18S1G2
4 Members
10 Guides authored
