Difficulty

Moderate

Steps

8

Time Required

                          5 - 25 minutes

Sections

3

  • Battery
  • 2 steps
  • Antenna
  • 2 steps
  • Rear Speaker
  • 4 steps

Flags

0

  • BackAlcatel IdealXCITE

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Place your finger in the small notch on the left corner of the phone.
  • Use your finger to gently pull up on the back cover where the notch is located.
  • Gently pull up on the back cover, working around the phone.
  • Remove the cover from the phone, and set it aside for later installation.

Place your finger in the small notch on the left corner of the phone.

Use your finger to gently pull up on the back cover where the notch is located.

Gently pull up on the back cover, working around the phone.

Remove the cover from the phone, and set it aside for later installation.

1024

Step 2

  • Place your thumb in the small notch between the battery and the phone.
  • Use your thumb to gently pry the battery up at the notch, releasing it from the phone.
  • Take note of the contacts in the phone and on the battery for reinstallation.

Place your thumb in the small notch between the battery and the phone.

Use your thumb to gently pry the battery up at the notch, releasing it from the phone.

Take note of the contacts in the phone and on the battery for reinstallation.

Step 3

              Antenna
  • Remove the four 4mm PH00 screws.

Remove the four 4mm PH00 screws.

Step 4

  • Using a spudger, pry upwards in the indentation on the bottom right corner of the phone.
  • Work the tool gently around the antenna to release it.

Using a spudger, pry upwards in the indentation on the bottom right corner of the phone.

Work the tool gently around the antenna to release it.

Step 5

              Rear Speaker
  • Remove the three 4mm PH00 screws holding the WiFi/GPS antenna in.
  • Gently pry the WiFi/GPS antenna out using a Jimmy and set aside.

Remove the three 4mm PH00 screws holding the WiFi/GPS antenna in.

Gently pry the WiFi/GPS antenna out using a Jimmy and set aside.

Step 6

  • Remove the three remaining 4mm PH00 screws.
  • Remove the two 3mm PH00 screws.

Remove the three remaining 4mm PH00 screws.

Remove the two 3mm PH00 screws.

Step 7

  • Using a spudger and an iFixit opening pick, pry the midframe up.

Using a spudger and an iFixit opening pick, pry the midframe up.

Step 8

  • Pry gently between the rear case and speaker using an iFixit opening pick.
  • Reapply adhesive to the new speaker when reassembling the phone.

Pry gently between the rear case and speaker using an iFixit opening pick.

Reapply adhesive to the new speaker when reassembling the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Franklin Froehlich

Member since: 03/07/2019

427 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Casper College, Team S1-G2, Lareau Spring 2019                        

                                                  Member of Casper College, Team S1-G2, Lareau Spring 2019 



                    CASC-LAREAU-S19S1G2                     


                                            4 Members                     


                                            6 Guides authored