Difficulty
Moderate
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Rear Camera
- 4 steps
Flags
0
BackAlcatel Jitterbug Smart
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Camera
- Pry back cover open with a medal spudger, or your fingernail, in the divot at the bottom left corner of the phone.
- Lift open case by the corner nearest the divot and remove it from the phone.
Pry back cover open with a medal spudger, or your fingernail, in the divot at the bottom left corner of the phone.
Lift open case by the corner nearest the divot and remove it from the phone.
1024
Step 2
- Remove the 13 1 mm Phillips screws with JIS #000 Screwdriver.
Remove the 13 1 mm Phillips screws with JIS #000 Screwdriver.
Step 3
- Gently pry off the Mid frame from the phone using a Metal Spudger.
Gently pry off the Mid frame from the phone using a Metal Spudger.
Step 4
- Use the Plastic Opening tools to gently dislodge the broken camera from the inside of the phone.
- Use a tweezers to pull the camera connector from its port.
- Be careful not to tear the camera from its connection.
Use the Plastic Opening tools to gently dislodge the broken camera from the inside of the phone.
Use a tweezers to pull the camera connector from its port.
Be careful not to tear the camera from its connection.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Gavin Le
Member since: 02/13/2018
469 Reputation
3 Guides authored
Badges:
12
+9 more badges
Team
USF Tampa, Team S11-G4, Cheng Spring 2018
Member of USF Tampa, Team S11-G4, Cheng Spring 2018
USFT-CHENG-S18S11G4
4 Members
10 Guides authored
