Difficulty

Moderate

Steps

10

Time Required

                          30 minutes

Sections

3

  • Back Frame
  • 5 steps
  • Main Circuit Board
  • 4 steps
  • Front Camera
  • 1 step

Flags

0

  • BackAlcatel One Touch Evolve 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Frame
  • Turn off the phone before proceeding with disassembly to prevent shock and potential shorting of any electrical somponents.
  • Remove the back cover using one of the plastic opening tools and the slit in one of the corners.
  • Be gentle when prying so as to not wear out the tool.

Turn off the phone before proceeding with disassembly to prevent shock and potential shorting of any electrical somponents.

Remove the back cover using one of the plastic opening tools and the slit in one of the corners.

Be gentle when prying so as to not wear out the tool.

1024

Step 2

  • Remove the battery using one of the plastic opening tools and the dome-shaped indent next to the battery face.

Remove the battery using one of the plastic opening tools and the dome-shaped indent next to the battery face.

Step 3

  • Unscrew the four 4mm JIS screws in each corner using the J000 screwdriver head. Turn the screws counter-clockwise to loosen.

Unscrew the four 4mm JIS screws in each corner using the J000 screwdriver head. Turn the screws counter-clockwise to loosen.

Step 4

  • Insert a plastic or metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose.

Insert a plastic or metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose.

Step 5

  • Pull the rear frame off with your hands.

Pull the rear frame off with your hands.

Step 6

              Main Circuit Board
  • Use a plastic opening tool to pop the speaker press-fit connector free.
  • Slide the edge of the tool under the connector and gently lift up on the edge; the connector should pop free with little force.

Use a plastic opening tool to pop the speaker press-fit connector free.

Slide the edge of the tool under the connector and gently lift up on the edge; the connector should pop free with little force.

Step 7

  • Use a plastic opening tool to lift the front camera press-fit connector free.

Use a plastic opening tool to lift the front camera press-fit connector free.

Step 8

  • Insert one of the plastic opening tools into any side of the main circuit board and gently pry it loose from the front cover. Repeat the process all around the circuit board.

Insert one of the plastic opening tools into any side of the main circuit board and gently pry it loose from the front cover. Repeat the process all around the circuit board.

Step 9

  • Detach the main circuit board from the front cover.

Detach the main circuit board from the front cover.

Step 10

              Front Camera
  • Slip the front camera out of its designated hole.

Slip the front camera out of its designated hole.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 1 other contributor 


                    Andrew Bai

Member since: 01/30/2017

634 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       IUPUI, Team 1-3, Baechle Spring 2017                        

                                                  Member of IUPUI, Team 1-3, Baechle Spring 2017 



                    IUPUI-BAECHLE-S17S1G3                     


                                            4 Members                     


                                            10 Guides authored