Difficulty
Moderate
Steps
10
Time Required
20 minutes
Sections
3
- Back Frame
- 5 steps
- Main Circuit Board
- 4 steps
- Front Speaker
- 1 step
Flags
1
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
BackAlcatel One Touch Evolve 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Frame
- Turn off the phone before proceeding with disassembly to prevent shock and potential shorting of any electrical somponents.
- Remove the back cover using one of the plastic opening tools and the slit in one of the corners.
- Be gentle when prying so as to not wear out the tool.
Turn off the phone before proceeding with disassembly to prevent shock and potential shorting of any electrical somponents.
Remove the back cover using one of the plastic opening tools and the slit in one of the corners.
Be gentle when prying so as to not wear out the tool.
1024
Step 2
- Remove the battery using one of the plastic opening tools and the dome-shaped indent next to the battery face.
Remove the battery using one of the plastic opening tools and the dome-shaped indent next to the battery face.
Step 3
- Unscrew the four 4mm JIS screws in each corner using the J000 screwdriver head. Turn the screws counter-clockwise to loosen.
Unscrew the four 4mm JIS screws in each corner using the J000 screwdriver head. Turn the screws counter-clockwise to loosen.
Step 4
- Insert a plastic or metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose.
Insert a plastic or metal spudger between the front cover and rear frame in one of the areas indicated by the red squares and gently pry the rear frame loose. Repeat the process all the way around the phone until the rear frame comes loose.
Step 5
- Pull the rear frame off with your hands.
Pull the rear frame off with your hands.
Step 6
Main Circuit Board
- Use a plastic opening tool to pop the speaker press-fit connector free.
- Slide the edge of the tool under the connector and gently lift up on the edge; the connector should pop free with little force.
Use a plastic opening tool to pop the speaker press-fit connector free.
Slide the edge of the tool under the connector and gently lift up on the edge; the connector should pop free with little force.
Step 7
- Use a plastic opening tool to lift the front camera press-fit connector free.
Use a plastic opening tool to lift the front camera press-fit connector free.
Step 8
- Insert one of the plastic opening tools into any side of the main circuit board and gently pry it loose from the front cover. Repeat the process all around the circuit board.
Insert one of the plastic opening tools into any side of the main circuit board and gently pry it loose from the front cover. Repeat the process all around the circuit board.
Step 9
- Detach the main circuit board from the front cover.
Detach the main circuit board from the front cover.
Step 10
Front Speaker
- Use a spudger to pry out the speaker from the front panel using the prongs on the speaker.
Use a spudger to pry out the speaker from the front panel using the prongs on the speaker.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Akira Nakaza
Member since: 11/08/2017
427 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
IUPUI, Team S5-G5, Baechle Fall 2017
Member of IUPUI, Team S5-G5, Baechle Fall 2017
IUPUI-BAECHLE-F17S5G5
3 Members
6 Guides authored
