Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

  • Rear Case
  • 1 step
  • Midframe
  • 1 step
  • Battery
  • 1 step

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackAlcatel One Touch Fierce

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case
  • Pry with a plastic opening tool, or your fingernail, in the divot at the bottom left corner of the phone.
  • Lift the rear case by the corner nearest the divot and remove it from the phone.

Pry with a plastic opening tool, or your fingernail, in the divot at the bottom left corner of the phone.

Lift the rear case by the corner nearest the divot and remove it from the phone.

1024

Step 2

              Midframe
  • Remove the 11 Phillips #000 screws.
  • The midframe should lift free.

Remove the 11 Phillips #000 screws.

The midframe should lift free.

Step 3

              Battery
  • Use the tip of a spudger to pull back the yellow tape covering the battery connector.
  • Use a pair of tweezers to pull the battery connector from its port.
  • Be careful not to tear the battery from its connection.

Use the tip of a spudger to pull back the yellow tape covering the battery connector.

Use a pair of tweezers to pull the battery connector from its port.

Be careful not to tear the battery from its connection.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      22 other people completed this guide.

Author

                                      with 3 other contributors 


                    Jonathan Ruiz

Member since: 12/13/2011

1,307 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Kapil Chaudhari - Jul 30, 2017

Reply

Hello.. please suggest how to remove battery of one touch FLASH.

It is non removable battery.. Since my mobile is unable to reboot I need to remove back cover to make it work

john vanlandingham - Dec 25, 2017

Reply

remove sd and sim cards with power off…same as fierce 4/pop 4 all Phillips 000 screws come out then carefully unsnap inner back case half from main case starting on opposite side of power button.with each snap undone, carefully pry case half’s apart using plastic tool or credit card. once apart, unfasten battery connector. power up phone before re assembly.once it works power off and reverse instructions to assemble.

fbanks47 - Apr 10, 2018

Reply

If the battery is so easy to remove, why is it called “non-removable”?

Alan Duncan - Aug 5, 2018

Reply

how do you reboot after battery replacement

How do I transfer google files from my alcotel phone to my computer