Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
- Rear Case
- 1 step
- Midframe
- 1 step
- Rear Facing Camera
- 1 step
Flags
0
BackAlcatel One Touch Fierce
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Pry with a plastic opening tool, or your fingernail, in the divot at the bottom left corner of the phone.
- Lift the rear case by the corner nearest the divot and remove it from the phone.
Pry with a plastic opening tool, or your fingernail, in the divot at the bottom left corner of the phone.
Lift the rear case by the corner nearest the divot and remove it from the phone.
1024
Step 2
Midframe
- Remove the 11 Phillips #000 screws.
- The midframe should lift free.
Remove the 11 Phillips #000 screws.
The midframe should lift free.
Step 3
Rear Facing Camera
- Use a pair of tweezers to gently disconnect the camera connector and remove the rear facing camera.
Use a pair of tweezers to gently disconnect the camera connector and remove the rear facing camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 2 other contributors
Cody Stouffer
Member since: 10/30/2014
449 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
UMass Dartmouth, Team 5-5, Vijaybhaskar Fall 2014
Member of UMass Dartmouth, Team 5-5, Vijaybhaskar Fall 2014
UMASSD-VIJAYBHASKAR-F14S5G5
3 Members
6 Guides authored