Alcatel One Touch Pop 7 Volume Button Assembly Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          8 minutes            

Sections

1

• Volume Button Assembly
• 4 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackAlcatel One Touch Pop 7

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Volume Button Assembly               

• Begin working by using the plastic opening tool to remove the back cover of your Alcatel One Touch Pop 7. Opening the flap as shown in the picture will give you an easier start.

Begin working by using the plastic opening tool to remove the back cover of your Alcatel One Touch Pop 7. Opening the flap as shown in the picture will give you an easier start.

1024

Step 2

• With the back cover removed you will now want to disconnect the battery. Use the tweezers and gently pull the wires as shown in the second picture.

With the back cover removed you will now want to disconnect the battery. Use the tweezers and gently pull the wires as shown in the second picture.

Step 3

• The volume button assembly is in the top left corner of the tablet. To begin, you will have to pull the small black tab of the ZIF connector, shown in the second picture, to be able to remove the assembly. The tab is on a hinge so it should not be pulled off completely.

The volume button assembly is in the top left corner of the tablet. To begin, you will have to pull the small black tab of the ZIF connector, shown in the second picture, to be able to remove the assembly. The tab is on a hinge so it should not be pulled off completely.

Step 4

• Pull the copper ribbon cable from the tab. It should be easily removed, as the ZIF connector is the only thing holding it in place.
• Next up is removing the volume button assembly. Another easy removal, simply pull the assembly away from the device and you’re done with the removal process.

Pull the copper ribbon cable from the tab. It should be easily removed, as the ZIF connector is the only thing holding it in place.

Next up is removing the volume button assembly. Another easy removal, simply pull the assembly away from the device and you’re done with the removal process.

To reassemble your device, follow these instructions in reverse order with the new volume button assembly replacing the old one.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Riley Cooper                     

Member since: 10/10/2016

926 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Sam Houston State, Team 12-1, Blackburne Fall 2016                        

                                                  Member of Sam Houston State, Team 12-1, Blackburne Fall 2016 



                    SHSU-BLACKBURNE-F16S12G1                     


                                            3 Members                     


                                            10 Guides authored