Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes

Sections

3

  • Battery
  • 2 steps
  • Interior Back Panel
  • 2 steps
  • Control Buttons
  • 2 steps

Flags

0

  • BackAlcatel OneTouch Pop Icon

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Shut down the device
  • Flip the phone so that the screen is facing the surface you are working on
  • Aggressive prying may result in damaging the back panel or the internal contents of the phone.
  • Use the plastic opening tool to gently pry off the back panel. There is a small notch in the bottom left corner of the phone that you can use for increased leverage.

Shut down the device

Flip the phone so that the screen is facing the surface you are working on

Aggressive prying may result in damaging the back panel or the internal contents of the phone.

Use the plastic opening tool to gently pry off the back panel. There is a small notch in the bottom left corner of the phone that you can use for increased leverage.

1024

Step 2

  • Use your thumbnail to lift the battery from the phone.

Use your thumbnail to lift the battery from the phone.

Step 3

              Interior Back Panel
  • Using the J000 Phillips screwdriver, remove the twelve silver 3mm screws.
  • Using the J000 Phillips screwdriver, remove the one green 3mm screw.

Using the J000 Phillips screwdriver, remove the twelve silver 3mm screws.

Using the J000 Phillips screwdriver, remove the one green 3mm screw.

Step 4

  • With the screen facing you and the front facing camera to your right, insert the plastic opening tool between the screen and the interior back panel and gently pry it off.
  • Make sure all of the clips come undone when you pry the seam loose.

With the screen facing you and the front facing camera to your right, insert the plastic opening tool between the screen and the interior back panel and gently pry it off.

Make sure all of the clips come undone when you pry the seam loose.

Step 5

              Control Buttons
  • Lift the latch and gently remove the ribbon from the latch.

Lift the latch and gently remove the ribbon from the latch.

Step 6

  • Use the metal spudger to gently pry the control buttons from the case.
  • The control buttons are glued to the case and are on a computer ribbon. When removing them it is best to move between them so as to avoid damaging them.
  • Make sure to use a plastic opening tool or nylon spudger before attempting to use a metal spudger. Metal spudgers can potentially damage your device.

Use the metal spudger to gently pry the control buttons from the case.

The control buttons are glued to the case and are on a computer ribbon. When removing them it is best to move between them so as to avoid damaging them.

Make sure to use a plastic opening tool or nylon spudger before attempting to use a metal spudger. Metal spudgers can potentially damage your device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Matthew Sheldon

Member since: 04/01/2016

230 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Eastern Washington University, Team 2-2, Andersen Spring 2016                        

                                                  Member of Eastern Washington University, Team 2-2, Andersen Spring 2016 



                    EWU-ANDERSEN-S16S2G2                     


                                            5 Members                     


                                            14 Guides authored