Alcatel Onetouch Pop Icon Interior Back Panel Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 - 10 minutes

Sections

Battery
2 steps
Interior Back Panel
2 steps

Flags

BackAlcatel OneTouch Pop Icon
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Shut down the device
Flip the phone so that the screen is facing the surface you are working on
Aggressive prying may result in damaging the back panel or the internal contents of the phone.
Use the plastic opening tool to gently pry off the back panel. There is a small notch in the bottom left corner of the phone that you can use for increased leverage.

Shut down the device

Flip the phone so that the screen is facing the surface you are working on

Aggressive prying may result in damaging the back panel or the internal contents of the phone.

Use the plastic opening tool to gently pry off the back panel. There is a small notch in the bottom left corner of the phone that you can use for increased leverage.

1024

Step 2

Use your thumbnail to lift the battery from the phone.

Use your thumbnail to lift the battery from the phone.

Step 3

              Interior Back Panel

Using the J000 Phillips screwdriver, remove the twelve silver 3mm screws.
Using the J000 Phillips screwdriver, remove the one green 3mm screw.

Using the J000 Phillips screwdriver, remove the twelve silver 3mm screws.

Using the J000 Phillips screwdriver, remove the one green 3mm screw.

Step 4

With the screen facing you and the front facing camera to your right, insert the plastic opening tool between the screen and the interior back panel and gently pry it off.
Make sure all of the clips come undone when you pry the seam loose.

With the screen facing you and the front facing camera to your right, insert the plastic opening tool between the screen and the interior back panel and gently pry it off.

Make sure all of the clips come undone when you pry the seam loose.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    John Halsey

Member since: 04/01/2016

1,000 Reputation

                                      5 Guides authored                  



                       Badges:
                       21







                                                        +18 more badges

Team

                       Eastern Washington University, Team 2-2, Andersen Spring 2016                        

                                                  Member of Eastern Washington University, Team 2-2, Andersen Spring 2016 



                    EWU-ANDERSEN-S16S2G2                     


                                            5 Members                     


                                            14 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team