Difficulty
Moderate
Steps
6
Time Required
10 - 15 minutes
Sections
1
- Battery
- 6 steps
Flags
0
BackAlcatel Pixi Theatre
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Take off the case by flipping the phone over and wedging your finger in the notch on the bottom edge. Pry up until you hear the clicking and the edge releases. Continue to pry the case up, moving around the perimeter of the phone.
- It should pop off in various places around the perimeter of the phone, and then come off easily.
Take off the case by flipping the phone over and wedging your finger in the notch on the bottom edge. Pry up until you hear the clicking and the edge releases. Continue to pry the case up, moving around the perimeter of the phone.
It should pop off in various places around the perimeter of the phone, and then come off easily.
1024
Step 2
- Using a Phillips #000 screwdriver, remove the fourteen 3mm screws that connect the housing and the battery.
Using a Phillips #000 screwdriver, remove the fourteen 3mm screws that connect the housing and the battery.
Step 3
- Remove the metal bracket covering the battery connector flex cable. Now that it’s unscrewed, it should come out easily.
Remove the metal bracket covering the battery connector flex cable. Now that it’s unscrewed, it should come out easily.
Step 4
- Disconnect the battery connector flex cable by sliding the black spudger under the wires and carefully prying up the entire terminal casing.
Disconnect the battery connector flex cable by sliding the black spudger under the wires and carefully prying up the entire terminal casing.
Step 5
- Be careful not to insert the Jimmy too far into the phone when prying the housing apart; if you do, you may damage the motherboard inside.
- Once removed from the rest of the phone, the sides of the housing are flimsier than the top and bottom. Be careful not to bend the housing when taking it off.
- Starting at the top left corner and moving around the perimeter of the phone, insert the Jimmy between the housing and the phone and gently pry it up.
Be careful not to insert the Jimmy too far into the phone when prying the housing apart; if you do, you may damage the motherboard inside.
Once removed from the rest of the phone, the sides of the housing are flimsier than the top and bottom. Be careful not to bend the housing when taking it off.
Starting at the top left corner and moving around the perimeter of the phone, insert the Jimmy between the housing and the phone and gently pry it up.
Step 6
- Remove the blue battery by lifting it straight up, or by gently turning the phone over into your palm and catching the battery as it comes out.
Remove the blue battery by lifting it straight up, or by gently turning the phone over into your palm and catching the battery as it comes out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Noah Elliott
Member since: 01/17/2018
339 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
Eastern Washington University, Team S1-G4, Ramos Winter 2018
Member of Eastern Washington University, Team S1-G4, Ramos Winter 2018
EWU-RAMOS-W18S1G4
4 Members
10 Guides authored
Leon Beckford - Apr 24, 2019
Reply
I am searching for a battery for my pixi theatre that I have. Does anyone know where i can get it to buy?
I’m sure these steps will work but all I have now is my beautiful phone with a dead battery and searching.
Leon Beckford - Jun 8, 2019
Reply
suggest where to find the replacement batteries for this.