Difficulty

Moderate

Steps

9

Time Required

                          10 minutes

Sections

2

  • Battery
  • 4 steps
  • Motherboard
  • 5 steps

Flags

0

  • BackAlcatel Pop 4 Plus

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.

Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.

1024

Step 2

  • Remove seventeen 3mm Phillips #000 screws from the mid-frame.

Remove seventeen 3mm Phillips #000 screws from the mid-frame.

Step 3

  • Use the flat end of the spudger, or your fingernail, to pry off the mid-frame.

Use the flat end of the spudger, or your fingernail, to pry off the mid-frame.

Step 4

  • Use the flat end of the spudger disconnect the battery from the motherboard.
  • Use the flat end of the spudger tool to pry out the battery.

Use the flat end of the spudger disconnect the battery from the motherboard.

Use the flat end of the spudger tool to pry out the battery.

Step 5

              Motherboard
  • Use a spudger to flip up the retaining flap on the USB ribbon cable ZIF socket.
  • Slide the ribbon cable out of the socket.

Use a spudger to flip up the retaining flap on the USB ribbon cable ZIF socket.

Slide the ribbon cable out of the socket.

Step 6

  • Use the flat end of a spudger to disconnect the ribbon cable.

Use the flat end of a spudger to disconnect the ribbon cable.

Step 7

  • Using the flat end of the spudger to disconnect the ribbon cable.

Using the flat end of the spudger to disconnect the ribbon cable.

Step 8

  • Using the flat end of the spudger, disconnect the camera from the motherboard.

Using the flat end of the spudger, disconnect the camera from the motherboard.

Step 9

  • Use the flat end of the spudger to pry off the motherboard.

Use the flat end of the spudger to pry off the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Pieter Molenaar

Member since: 01/25/2018

253 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team S20-G6, Passmore Spring 2018                        

                                                  Member of USF Tampa, Team S20-G6, Passmore Spring 2018 



                    USFT-PASSMORE-S18S20G6                     


                                            4 Members                     


                                            12 Guides authored