Difficulty
Moderate
Steps
6
Time Required
10 minutes
Sections
2
- Battery
- 4 steps
- Rear Camera
- 2 steps
Flags
0
BackAlcatel Pop 4 Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.
Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.
1024
Step 2
- Remove seventeen 3mm Phillips #000 screws from the mid-frame.
Remove seventeen 3mm Phillips #000 screws from the mid-frame.
Step 3
- Use the flat end of the spudger, or your fingernail, to pry off the mid-frame.
Use the flat end of the spudger, or your fingernail, to pry off the mid-frame.
Step 4
- Use the flat end of the spudger disconnect the battery from the motherboard.
- Use the flat end of the spudger tool to pry out the battery.
Use the flat end of the spudger disconnect the battery from the motherboard.
Use the flat end of the spudger tool to pry out the battery.
Step 5
Rear Camera
- Use the flat end of the spudger tool to remove the connector.
Use the flat end of the spudger tool to remove the connector.
Step 6
- Pry out the camera with the pointy end of the spudger tool.
Pry out the camera with the pointy end of the spudger tool.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Maalik Poleon
Member since: 01/25/2018
202 Reputation
2 Guides authored
Badges:
3
Team
USF Tampa, Team S20-G6, Passmore Spring 2018
Member of USF Tampa, Team S20-G6, Passmore Spring 2018
USFT-PASSMORE-S18S20G6
4 Members
12 Guides authored
