Difficulty
Moderate
Steps
9
Time Required
10 - 20 minutes
Sections
1
- Wireless Card
- 9 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackAlienware 17 R2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Removing the Screw
- WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
- Remove the screw that secures the wireless-card bracket and the wireless card to the system board.
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
Remove the screw that secures the wireless-card bracket and the wireless card to the system board.
1024
Step 2
Lifting the Card Bracket
- Lift the wireless-card bracket off the wireless card.
Lift the wireless-card bracket off the wireless card.
Step 3
Disconnecting Antenna Cables
- Disconnect the antenna cables from the wireless card.
Disconnect the antenna cables from the wireless card.
Step 4
Removing the Wireless Card
- Lift and slide the wireless card from the wireless-card slot.
Lift and slide the wireless card from the wireless-card slot.
Step 5
- CAUTION: To avoid damaging the wireless card, do not place any cables under it.
- Align the notch on the wireless card with the tab on the wireless-card slot.
CAUTION: To avoid damaging the wireless card, do not place any cables under it.
Align the notch on the wireless card with the tab on the wireless-card slot.
Step 6
Sliding the Wireless Card
- Slide the wireless card at an angle into the wireless-card slot.
Slide the wireless card at an angle into the wireless-card slot.
Step 7
Connecting Cables to the Wireless Card
- Connect the antenna cables to the wireless-card.
- The following is the antenna-cable color color scheme for the wireless card: Main (white triangle) = White Auxiliary (black triangle) = Black
Connect the antenna cables to the wireless-card.
The following is the antenna-cable color color scheme for the wireless card: Main (white triangle) = White Auxiliary (black triangle) = Black
Step 8
Aligining the Screw Holes
- Align the screw hole on the wireless-card bracket with the screw hole on the wireless card.
Align the screw hole on the wireless-card bracket with the screw hole on the wireless card.
Step 9
Replacing the Screw
- Replace the screw that secures the wireless-card bracket and the wireless card to the system board.
Replace the screw that secures the wireless-card bracket and the wireless card to the system board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Terrence15
Member since: 12/18/2017
78,526 Reputation
441 Guides authored
Badges:
28
+25 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored