Difficulty

Moderate

Steps

4

Time Required

                          30 minutes            

Sections

1

  • Camera
  • 4 steps

Flags

0

  • BackAlienware Aurora M9700

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Camera               
  • Open the device so the main screen is facing forward.
  • Locate the 8 rubber buttons around the bezel of the display and remove the rubber buttons with the metal spudger to expose the screws underneath.
  • Locate the 8 screws around the perimeter of the screen and unscrew them.

Open the device so the main screen is facing forward.

Locate the 8 rubber buttons around the bezel of the display and remove the rubber buttons with the metal spudger to expose the screws underneath.

Locate the 8 screws around the perimeter of the screen and unscrew them.

1024

Step 2

  • Insert the plastic opening tool between the black and green frames to remove the display frame at the bottom of the display.
  • Slide the lock to the right when removing the display frame.
  • Remove the frame display.

Insert the plastic opening tool between the black and green frames to remove the display frame at the bottom of the display.

Slide the lock to the right when removing the display frame.

Remove the frame display.

Step 3

  • Now that the outer frame is removed, locate the two screws to the right and the left of the camera.
  • Remove the two screws freeing the camera of the brackets holding it in place.
  • Pry the camera upward from its designated location using the metal spudger.

Now that the outer frame is removed, locate the two screws to the right and the left of the camera.

Remove the two screws freeing the camera of the brackets holding it in place.

Pry the camera upward from its designated location using the metal spudger.

Step 4

  • Unplug the wire connection between the camera and the laptop.

Unplug the wire connection between the camera and the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Jasmine Anchondo                     

Member since: 10/09/2018

679 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Sam Houston State, Team S15-G3, Blackburne Fall 2018                        

                                                  Member of Sam Houston State, Team S15-G3, Blackburne Fall 2018 



                    SHSU-BLACKBURNE-F18S15G3                     


                                            4 Members                     


                                            5 Guides authored