Difficulty
Very easy
Steps
5
Time Required
2 - 4 minutes
Sections
2
- Battery
- 4 steps
- Optical Drive
- 1 step
Flags
0
BackAlienware M14x R2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the computer off.
- Disconnect the charging cable from the computer.
- Failure to unplug the charging cable could result in electric shock and serious injury.
- Flip the computer upside down.
Turn the computer off.
Disconnect the charging cable from the computer.
Failure to unplug the charging cable could result in electric shock and serious injury.
Flip the computer upside down.
1024
Step 2
- Loosen the two 6.35 mm size 1 Phillips screws on the back cover.
- The two screws are spring loaded and will not separate from the cover.
- Slide the back cover towards you and then lift upwards to remove.
Loosen the two 6.35 mm size 1 Phillips screws on the back cover.
The two screws are spring loaded and will not separate from the cover.
Slide the back cover towards you and then lift upwards to remove.
Step 3
- Loosen the two 6.35 mm size 1 Philips screws attaching the battery to the laptop.
- The two screws are clipped into the battery and will not detach.
Loosen the two 6.35 mm size 1 Philips screws attaching the battery to the laptop.
The two screws are clipped into the battery and will not detach.
Step 4
- Pull up on the black tab on the battery to reveal the connection between the battery and laptop.
- Pull up on the white connector to disconnect it from the laptop.
- The battery is now free to remove from the laptop and can be set aside.
Pull up on the black tab on the battery to reveal the connection between the battery and laptop.
Pull up on the white connector to disconnect it from the laptop.
The battery is now free to remove from the laptop and can be set aside.
Step 5
Optical Drive
- Unscrew the four 6.35 mm size 1 screws.
- Pull up on the end of the orange tab to detach it from the white connector.
- Lift the optical drive up and out of the laptop and set it aside.
Unscrew the four 6.35 mm size 1 screws.
Pull up on the end of the orange tab to detach it from the white connector.
Lift the optical drive up and out of the laptop and set it aside.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Jordan Ramsey
Member since: 09/30/2013
402 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
Cal Poly, Team 13-4, Forte Fall 2013
Member of Cal Poly, Team 13-4, Forte Fall 2013
CPSU-FORTE-F13S13G4
5 Members
6 Guides authored