Difficulty
Easy
Steps
15
Time Required
10 - 25 minutes
Sections
2
- Battery Pack
- 5 steps
- Hard-Drive
- 10 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackAlienware M15x
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Turn the Computer
- WARNING: Before working inside your computer, read the safety information that shipped with your computer.
- Turn the computer over.
WARNING: Before working inside your computer, read the safety information that shipped with your computer.
Turn the computer over.
1024
Step 2
Sliding the Battery
- Slide the battery latch to the unlock position as shown.
Slide the battery latch to the unlock position as shown.
Step 3
Removing the Battery Pack
- After the Battery Pack pops up, remove the Battery Pack.
After the Battery Pack pops up, remove the Battery Pack.
Step 4
Aligning the Battery Pack Tabs
- Align the battery pack tabs with the slots in the battery bay.
Align the battery pack tabs with the slots in the battery bay.
Step 5
Pushing the Battery Pack
- Push the NEW battery pack into the battery bay until the battery pack clicks into place.
Push the NEW battery pack into the battery bay until the battery pack clicks into place.
Step 6
Loosen the Screws
- WARNING: Before working inside your computer, read the safety information that shipped with your computer.
- WARNING: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.
- Loosen the four captive screws that secure the hard-drive assembly.
WARNING: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.
Loosen the four captive screws that secure the hard-drive assembly.
Step 7
Lifting the Hard-Drive Assembly
- Using the pull-tab, lift the hard-drive assembly out of the hard-drive bay.
Using the pull-tab, lift the hard-drive assembly out of the hard-drive bay.
Step 8
Remove the Screws
- Remove the four screws that secure the hard drive to the hard-drive bracket.
Remove the four screws that secure the hard drive to the hard-drive bracket.
Step 9
Lifting the Hard Drive
- Lift the hard drive out of the hard-drive bracket.
Lift the hard drive out of the hard-drive bracket.
Step 10
Disconnect the Interposer
- Disconnect the interposer from the hard drive.
Disconnect the interposer from the hard drive.
Step 11
Connecting the Interposer
- Connect the interposer to the NEW hard drive.
Connect the interposer to the NEW hard drive.
Step 12
Placing the Hard-Drive in the Bracket
- Place the hard drive in the hard-drive bracket.
Place the hard drive in the hard-drive bracket.
Step 13
Replace the Four Screws
- Replace the four screws that secure the hard drive to the hard-drive bracket.
Replace the four screws that secure the hard drive to the hard-drive bracket.
Step 14
Placing the Hard-Drive Assembly
- Place the hard-drive assembly in the hard-drive bay.
Place the hard-drive assembly in the hard-drive bay.
Step 15
Aligning and Tightening the Screws
- Align and tighten the four captive screws that secure the hard-drive assembly to the hard-drive bay.
Align and tighten the four captive screws that secure the hard-drive assembly to the hard-drive bay.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Terrence15
Member since: 12/18/2017
78,526 Reputation
441 Guides authored
Badges:
28
+25 more badges
Team
Informative Technologies Inc.
Member of Informative Technologies Inc.
Community
38 Members
1,980 Guides authored