Difficulty
Moderate
Steps
6
Time Required
15 - 20 minutes
Sections
2
- Battery
- 2 steps
- CPU Cooler
- 4 steps
Flags
0
BackAlienware M17-R1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Push the slider until the battery is released from its socket.
Push the slider until the battery is released from its socket.
1024
Step 2
- Lift the battery using your fingers.
- It may be necessary to use a plastic opening tool.
Lift the battery using your fingers.
It may be necessary to use a plastic opening tool.
Step 3
CPU Cooler
- First begin by placing the laptop on a hard flat surface.
- Remove the nine 3 mm screws that secure the back panel using a Phillips #1 screwdriver.
First begin by placing the laptop on a hard flat surface.
Remove the nine 3 mm screws that secure the back panel using a Phillips #1 screwdriver.
Step 4
- Once the cover has been removed, locate the CPU Cooler to begin the replacement.
Once the cover has been removed, locate the CPU Cooler to begin the replacement.
Step 5
- Remove the six 7 mm screws using a Phillips #1 and then use the pry tool to unplug the fan before removing the CPU Cooler.
- Screws 1 through 4 are integrated into the cooler and will come all the way out.
Remove the six 7 mm screws using a Phillips #1 and then use the pry tool to unplug the fan before removing the CPU Cooler.
Screws 1 through 4 are integrated into the cooler and will come all the way out.
Step 6
- Once all screws have been removed and the cooler has been unplugged, gently lift the cooler out of its compartment to install the new cooling fan.
Once all screws have been removed and the cooler has been unplugged, gently lift the cooler out of its compartment to install the new cooling fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
LXA054
Member since: 10/09/2018
325 Reputation
3 Guides authored
Badges:
3
Team
Sam Houston State, Team S15-G2, Blackburne Fall 2018
Member of Sam Houston State, Team S15-G2, Blackburne Fall 2018
SHSU-BLACKBURNE-F18S15G2
4 Members
5 Guides authored