Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
2
- Battery
- 4 steps
- Hard Drive
- 2 steps
Flags
0
BackAlienware M17x
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn off your laptop before starting.
- Flip the laptop over so the model stickers face the ceiling.
Turn off your laptop before starting.
Flip the laptop over so the model stickers face the ceiling.
1024
Step 2
- Remove the two 3.5 mm Phillips #0 screws holding the cover in place.
- Slide cover forward then carefully lift up.
Remove the two 3.5 mm Phillips #0 screws holding the cover in place.
Slide cover forward then carefully lift up.
Step 3
- Remove the two 5.5 mm Phillips #0 screws holding the battery in place.
Remove the two 5.5 mm Phillips #0 screws holding the battery in place.
Step 4
- Carefully use the Plastic Opening Tool to unplug the battery.
- Lift the battery up and out to remove.
Carefully use the Plastic Opening Tool to unplug the battery.
Lift the battery up and out to remove.
Step 5
Hard Drive
- With the laptop flipped over, cover removed, and battery removed; continue by locating your hard drive(s).
With the laptop flipped over, cover removed, and battery removed; continue by locating your hard drive(s).
Step 6
- Remove the eight 3.5 mm Phillips #0 screws.
- Remove the hard drive(s), using the Plastic Opening Tool by lifting on the edges and pulling the hard drive up and out.
Remove the eight 3.5 mm Phillips #0 screws.
Remove the hard drive(s), using the Plastic Opening Tool by lifting on the edges and pulling the hard drive up and out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Mosier Locke
Member since: 09/27/2018
702 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
Oregon Institute of Technology, Team S1-G2, Lancaster Fall 2018
Member of Oregon Institute of Technology, Team S1-G2, Lancaster Fall 2018
OIT-LANCASTER-F18S1G2
3 Members
5 Guides authored