Alldaymall A88X Speaker Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          10 - 25 minutes

Sections

Alldaymall A88X Back Cover
2 steps
Speaker
3 steps

Flags

Featured Student Guide

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

BackAlldaymall A88X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Alldaymall A88X Back Cover

Using a plastic opening tool, carefully pry the device apart. Make your way around the entire perimeter of the device and carefully place the two panels next to each other.
After the panels are separated, watch out for the speaker on the rear panel as it’s wire is rather short.
When separating the panels keep an eye out for the power button and volume rocker as they can be dislodged.

Using a plastic opening tool, carefully pry the device apart. Make your way around the entire perimeter of the device and carefully place the two panels next to each other.

After the panels are separated, watch out for the speaker on the rear panel as it’s wire is rather short.

When separating the panels keep an eye out for the power button and volume rocker as they can be dislodged.

1024

Step 2

Grip the speaker from the sides with your fingers or a pair of tweezers and slowly begin to remove it from the rear panel.
When removing the speaker, make sure not to disconnect the wires in any way.
After the speaker has been removed, place the rear panel aside.

Grip the speaker from the sides with your fingers or a pair of tweezers and slowly begin to remove it from the rear panel.

When removing the speaker, make sure not to disconnect the wires in any way.

After the speaker has been removed, place the rear panel aside.

Step 3

              Speaker

Carefully separate the speaker wire from the tape and proceed to peel the tape off in an upwards direction.
The tape we are removing covers a number of connections on the motherboard. Be extra careful not to sever any of these.

Carefully separate the speaker wire from the tape and proceed to peel the tape off in an upwards direction.

The tape we are removing covers a number of connections on the motherboard. Be extra careful not to sever any of these.

Step 4

Using a pair of tweezers, begin separating the tape downwards from the back panel.
Pull the tape away from the wire bundle beneath.
Isolate the wire running from the speaker to the motherboard.

Using a pair of tweezers, begin separating the tape downwards from the back panel.

Pull the tape away from the wire bundle beneath.

Isolate the wire running from the speaker to the motherboard.

Step 5

Desolder the speaker wires from the motherboard.

Desolder the speaker wires from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Drhaber

Member since: 02/10/2016

985 Reputation

                                      7 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team 4-1, Lacy Spring 2016                        

                                                  Member of USF Tampa, Team 4-1, Lacy Spring 2016 



                    USFT-LACY-S16S4G1                     


                                            4 Members                     


                                            16 Guides authored

Featured Student Guide#

Introduction#

What you need#

Team#

Featured Student Guide

Introduction

What you need

Team