Altec Lansing Mini Lifejacket 2 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

13

Time Required

                          10 minutes            

Sections

3

• Back Panel
• 9 steps
• Battery
• 1 step
• Motherboard
• 3 steps

Flags

0

• BackAltec Lansing Mini Lifejacket 2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Use the spudger to remove the eight black pins from the front and back of the wire screens.

Use the spudger to remove the eight black pins from the front and back of the wire screens.

1024

Step 2

• Detach the eight secondary pins from the front and back of the wire mesh plates with a spudger.
• Removing the secondary pins from the rubber casing is optional.

Detach the eight secondary pins from the front and back of the wire mesh plates with a spudger.

Removing the secondary pins from the rubber casing is optional.

Step 3

• Remove both black and orange layers from the speaker body.

Remove both black and orange layers from the speaker body.

Step 4

• Remove the single 7.8mm Phillips #2 screw from the mounting plate located under the device.
• Slide the mounting plate out to remove it.

Remove the single 7.8mm Phillips #2 screw from the mounting plate located under the device.

Slide the mounting plate out to remove it.

Step 5

• Pry off the wire mesh on both sides using a metal spudger.
• Be gentle to avoid bending the mesh.

Pry off the wire mesh on both sides using a metal spudger.

Be gentle to avoid bending the mesh.

Step 6

• Using tweezers, remove the four rubber stoppers in each corner of the rear panel.

Using tweezers, remove the four rubber stoppers in each corner of the rear panel.

Step 7

• Remove the four 13.7mm Phillips #1 screws located underneath the rubber stoppers.

Remove the four 13.7mm Phillips #1 screws located underneath the rubber stoppers.

Step 8

• Pull the case apart to access the interior components.

Pull the case apart to access the interior components.

Step 9

• To remove the back panel, gently pull out its wire harness.

To remove the back panel, gently pull out its wire harness.

Step 10

              Battery               

• Disconnect the battery from the motherboard.
• The battery is not secured within the case and can be removed after detaching its wiring from the circuit board.

Disconnect the battery from the motherboard.

The battery is not secured within the case and can be removed after detaching its wiring from the circuit board.

Step 11

              Motherboard               

• Unplug the remaining four wire harnesses attached to the circuit board

Unplug the remaining four wire harnesses attached to the circuit board

Step 12

• Remove the three 9.1mm Phillips #1 screws located on the circuit board.

Remove the three 9.1mm Phillips #1 screws located on the circuit board.

Step 13

• Remove the motherboard.

Remove the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Stephen Albrecht                     

Member since: 02/14/2018

1,008 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       USF Tampa, Team S3-G2, Nance Spring 2018                        

                                                  Member of USF Tampa, Team S3-G2, Nance Spring 2018 



                    USFT-NANCE-S18S3G2                     


                                            4 Members                     


                                            4 Guides authored                     

Nick Cote - Feb 12, 2020

Reply

I own the IMW778-BLU-TA model. Where can I find a replacement motherboard for it??

Travis - Jul 15, 2020

Reply

same for me, anyone knows where can I find a replacement of the motherboard? thx

rahul pande - May 14, 2021

Reply

need back panel replacement

Mr Shopper - Jun 15, 2021

Reply

Same here! Loved the product. Can not afford to buy something else.

John Proffit - Oct 19, 2021

Reply

I need 2 the board for charging,usb,aux cord that plugs into motherboard.