Difficulty

Moderate

Steps

12

Time Required

                          9 minutes

Sections

2

  • Back Panel
  • 9 steps
  • Speaker
  • 3 steps

Flags

0

  • BackAltec Lansing Mini Lifejacket 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Use the spudger to remove the eight black pins from the front and back of the wire screens.

Use the spudger to remove the eight black pins from the front and back of the wire screens.

1024

Step 2

  • Detach the eight secondary pins from the front and back of the wire mesh plates with a spudger.
  • Removing the secondary pins from the rubber casing is optional.

Detach the eight secondary pins from the front and back of the wire mesh plates with a spudger.

Removing the secondary pins from the rubber casing is optional.

Step 3

  • Remove both black and orange layers from the speaker body.

Remove both black and orange layers from the speaker body.

Step 4

  • Remove the single 7.8mm Phillips #2 screw from the mounting plate located under the device.
  • Slide the mounting plate out to remove it.

Remove the single 7.8mm Phillips #2 screw from the mounting plate located under the device.

Slide the mounting plate out to remove it.

Step 5

  • Pry off the wire mesh on both sides using a metal spudger.
  • Be gentle to avoid bending the mesh.

Pry off the wire mesh on both sides using a metal spudger.

Be gentle to avoid bending the mesh.

Step 6

  • Using tweezers, remove the four rubber stoppers in each corner of the rear panel.

Using tweezers, remove the four rubber stoppers in each corner of the rear panel.

Step 7

  • Remove the four 13.7mm Phillips #1 screws located underneath the rubber stoppers.

Remove the four 13.7mm Phillips #1 screws located underneath the rubber stoppers.

Step 8

  • Pull the case apart to access the interior components.

Pull the case apart to access the interior components.

Step 9

  • To remove the back panel, gently pull out its wire harness.

To remove the back panel, gently pull out its wire harness.

Step 10

              Speaker
  • Remove the three 9.3 mm Phillips #1 screws on the speaker cover.

Remove the three 9.3 mm Phillips #1 screws on the speaker cover.

Step 11

  • To remove the speaker, gently pull out the its wire harness.

To remove the speaker, gently pull out the its wire harness.

Step 12

  • Remove the rubber ring from the rim of the speaker.
  • This ring helps keep water from entering the device. Be careful to position it correctly during reassembly.

Remove the rubber ring from the rim of the speaker.

This ring helps keep water from entering the device. Be careful to position it correctly during reassembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Stephen Albrecht

Member since: 02/14/2018

1,008 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team S3-G2, Nance Spring 2018                        

                                                  Member of USF Tampa, Team S3-G2, Nance Spring 2018 



                    USFT-NANCE-S18S3G2                     


                                            4 Members                     


                                            4 Guides authored

russell rogge - Oct 28, 2018

Reply

What speaker should we be getting to replace the faulty speaker, including the wires needed to plug into the slots on the board?

T Rex movies - Aug 11, 2019

Reply

Where can I get this speaker parts?