Alternator Replacement Repair Guide

Difficulty

Easy

Steps

1

Time Required

                          1 minute            

Sections

• Alternator
• 1 step

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackBriggs and Stratton 5.5HP 123k02-0239-E1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove bolts and wire               

• Push the metal tab closest to the black wire down. While pushing the tab down, pull the black wire out of the clip.
• Using a 1/4 socket, remove the two bolts holding the alternator to the engine.
• From the alternator side, gently pull the black wire out past the cylinder it is routed under on the engine.

Push the metal tab closest to the black wire down. While pushing the tab down, pull the black wire out of the clip.

Using a 1/4 socket, remove the two bolts holding the alternator to the engine.

From the alternator side, gently pull the black wire out past the cylinder it is routed under on the engine.

1024

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Jacob Micallef                     

Member since: 03/06/2017

993 Reputation

                                      7 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges