Difficulty
Moderate
Steps
5
Time Required
15 - 35 minutes
Sections
1
- Speakers
- 5 steps
Flags
0
BackAluratek ADMPF310F
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Speakers
- Using the plastic opening tool pry off the clips all around the frame. You will hear a popping sound for every clip
- Be sure not to pry to hard because you could crack or break the plastic facing of the device.
Using the plastic opening tool pry off the clips all around the frame. You will hear a popping sound for every clip
Be sure not to pry to hard because you could crack or break the plastic facing of the device.
1024
Step 2
- Lift screen out of place so you can access the plugs that connect it.
- Be careful not to pull the screen to far away when placing to the side, many fragile wires are connected.
Lift screen out of place so you can access the plugs that connect it.
Be careful not to pull the screen to far away when placing to the side, many fragile wires are connected.
Step 3
- Unplug both plugs for the speakers to the motherboard
Unplug both plugs for the speakers to the motherboard
Step 4
- Use plastic opening tool to pull out one of the speakers.
- Then use your hand to take out the other speaker
Use plastic opening tool to pull out one of the speakers.
Then use your hand to take out the other speaker
Step 5
- Disconnect the wires off of the old speakers and solder the old wires onto the new speakers.
Disconnect the wires off of the old speakers and solder the old wires onto the new speakers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Chris Belair
Member since: 10/20/2016
333 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team 5-1, Martin Fall 2016
Member of UMass Dartmouth, Team 5-1, Martin Fall 2016
UMASSD-MARTIN-F16S5G1
3 Members
5 Guides authored