Amazon Echo Dot 2Nd Generation 4 In 1 Wifi Bluetooth Fm Gps Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          5 minutes            

Sections

1

• 4-in-1 WiFi/Bluetooth/FM/GPS
• 4 steps

Flags

0

• History
• Save to Favorites
• Download PDF
• Edit
• Translate
• Get Shareable Link
• Embed This Guide
• Notify Me of Changes
• Stop Notifications

Introduction

What you need

Step 1

              4-in-1 WiFi/Bluetooth/FM/GPS               

• Power off and unplug the echo
• Using the plastic opening tool, peel off the rubber layer on the bottom of the echo

Power off and unplug the echo

Using the plastic opening tool, peel off the rubber layer on the bottom of the echo

1024

Step 2

• Use a T8 screwdriver bit to unscrew the four 1.6mm torx screws
• Remove the black cylindrical base

Use a T8 screwdriver bit to unscrew the four 1.6mm torx screws

Remove the black cylindrical base

Step 3

• Use the metal spudger to lift the ZIF connector
• Remove the ribbon cable from the slot

Use the metal spudger to lift the ZIF connector

Remove the ribbon cable from the slot

Step 4

• Remove the motherboard

Remove the motherboard

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Alexis White                     

Member since: 10/09/2017

411 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team S1-G3, Leahy Fall 2017                        

                                                  Member of USF Tampa, Team S1-G3, Leahy Fall 2017 



                    USFT-LEAHY-F17S1G3                     


                                            3 Members                     


                                            11 Guides authored                     

Ivan - Jun 29, 2018

Reply

Where can I find the part my dot won’t connect and I have been going crazy trying to find the motherboard

rayramirez - Dec 10, 2019

Reply

I wish to recommend not removing the adhesive layer if you plan to reassemble this Echo Dot. I would suggest poking holes to reach the four screws instead. Then reassembly can reuse the same adhesive layer.