Difficulty
Moderate
Steps
7
Time Required
15 minutes
Sections
1
- Analog to Digital Convertor
- 7 steps
Flags
0
- History
- Save to Favorites
- Download PDF
- Edit
- Translate
- Get Shareable Link
- Embed This Guide
- Notify Me of Changes
- Stop Notifications
Introduction
What you need
Step 1
Analog to Digital Convertor
- Power off and unplug the echo
- Using the plastic opening tool, peel off the rubber layer on the bottom of the echo
Power off and unplug the echo
Using the plastic opening tool, peel off the rubber layer on the bottom of the echo
1024
Step 2
- Use a T8 screwdriver to unscrew the four 1.6mm torx screws
- Remove the black cylindrical base
Use a T8 screwdriver to unscrew the four 1.6mm torx screws
Remove the black cylindrical base
Step 3
- Use the metal spudger to lift the ZIF connector
- Remove the ribbon cable from the slot
Use the metal spudger to lift the ZIF connector
Remove the ribbon cable from the slot
Step 4
- Remove the motherboard
Remove the motherboard
Step 5
- Remove the silver divider
- Remove the black rubber divider
- Remove the plastic white frame
Remove the silver divider
Remove the black rubber divider
Remove the plastic white frame
Step 6
- Use the metal spudger to lift the ZIF connector
- Remove the ribbon cable from the slot on the speaker board
Remove the ribbon cable from the slot on the speaker board
Step 7
- Remove the speaker board which contains the analog to digital converter
Remove the speaker board which contains the analog to digital converter
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Cassidy O'Connor
Member since: 10/09/2017
408 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team S1-G3, Leahy Fall 2017
Member of USF Tampa, Team S1-G3, Leahy Fall 2017
USFT-LEAHY-F17S1G3
3 Members
11 Guides authored
